This feature is only available to Administrators of the Dashboard.
If you would like to inspect the data from one of your pieces of equipment, it's possible to export the recorded samples for a desired period using the Export Device Samples function on the Dashboard. You can find the Export Device Samples page in the User Menu, under the Admin Tools subheading.
Export sensor data by entering the MAC Address of the desired device into the Device serial list field, where a device will drop down below the field to confirm the MAC Address which matches the equipment, as below. Then select the Start and End dates respectively using the calendar tool and press the blue Export Data button. This will create an Excel document that you can find in your downloads folder.
The Excel file contains multiple columns of data with a row for each data sample received and a header row.
The valuable data labels are as follows -
|timestamp||Data & time the data was collected (ISO Format)|
|device_serial||Serial number of the sensor (MAC Address)|
|temperature_condition||the AI Temperature condition assessment (0 > 1, 0 being 'good' and 1 being 'bad')|
|vibration_condition||the AI Vibration condition assessment (On a scale of 0 > 1, 0 being 'good' and 1 being 'bad')|
|overall_condition||the AI Overall condition assessment (On a scale of 0 > 1, 0 being 'good' and 1 being 'bad')|
|tmp||Measured temperature (°C)|
|rms||The vibration level as measured by the sensor (mm/s² - an average over 1024 samples taken over 1/4 second from the timestamp)|
|running||Whether the equipment is running or not (Boolean)|