This article outlines how to adjust the running cut-off (RCO) of your equipment.
To adjust the running cut-off you'll need to sign in to the Dashboard as an Administrator.
Find the device that you would like to adjust the running cut-off for, and click on the link to open the Equipment Detail View. An example of the Equipment Detail View page can be seen below.
On this page, scroll down to the Measured Data Chart (see below).
On the measured data chart, click the settings cog drop down menu (pictured) and click edit running cut-off value. Adjust this to the appropriate value based on the measured data you are seeing on the MOVUS measured data chart.
Please do not use measurements from any other vibration measuring equipment to set your running cut-off as there may be differences in the readings.
Be careful when adjusting the running cut-off that you do not set it so high that your equipment running data is skewed or discontinuous during operation. This will affect the Learning process, leading to an inaccurate representation of the 'normal' running condition.
Once you have set the running cut-off to the appropriate level, hit the 'Save' button.
If you'd like to learn more about the running cut-off and what it is, click here.
Thanks for reading! As always, if you have any questions or concerns please reach out to MOVUS Support here.