Matt Nade

  • Total activity 134
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 1
  • Subscriptions 73

Activity overview

Latest activity by Matt Nade
  • Matt Nade created an article,

    Connecting a FitMachine to your WiFi Network

    The aim of this article is to instruct you how to onboard a FitMachine using your own WiFi network to communicate to the MachineCloud. You will not have purchased or received any MOVUS Gateways in ...

  • Matt Nade created an article,

    Signing in to the MachineCloud Dashboard

    You will have previously logged into the Dashboard by navigating to the domain name of your organisation (eg. The new MachineCloud Dashboard directs all of our cu...

  • Matt Nade created a post,

    Enhancement of the 'Notes' capability in the dashboard

    It may be useful to enhance the existing 'Notes' field in the dashboard, so that they are more visible, and used on notifications, eg the note may say 'we are monitoring an issue on this pump, so i...

  • Matt Nade created a post,

    Gateway Outage Alerts

    Without maintaining constant visibility on the Status page of the Dashboard, it's hard to tell when a Gateway goes offline. Symptoms of a Gateway losing power are a series of FitMachines stopping r...

  • Matt Nade created a post,

    Incorporate a UPS into the Gateway in case of power interruptions

    If there's a power interruption at the GPO supplying the Gateway, none of the FitMachines can push their data to the Machine Cloud or Dashboard. This will allow for continued coverage of equipment ...

  • Matt Nade commented,

    Official comment

    Thanks Braham, this is certainly on our radat (internally) but hadn't yet been listed on our public wishlist.  Stay Tuned, and thanks for adding it!   Matt  

  • Matt Nade created an article,

    FitMachine - WiFi Network Requirements

    If you plan to have your FitMachine achieve connectivity to the MachineCloud via your own WiFi Network (and not via a MOVUS Gateway), the details you will need for setup can be found below:   Authe...

  • Matt Nade created a post,

    Accept Hard Wired sensor input

    Many plant monitoring and sensor systems (existing sensors) provide basic 4-20 mA and 0 to 5V outputs. It would be great if the FitMachine sensor had the ability to have these inputs hardwired into...

  • Matt Nade created a post,

    Display Network SSID a FitMachine is using in dashboard

    It would be great to show the SSID each FitMachine is connecting to on the Dashboard 'Status' page. Suggestion would be for this to show as a 'title' under the Signal Strength column for each devic...

  • Matt Nade created a post,

    'Automatic Sensing / Adjusting' of best 'running cutoff' vibration level for each asset

    It would be great if the system 'auto senses' when the running cutoff is set too low, and warns the users / possibly even adjusts itself automatically if possible.   At present, users have to revie...